704FBR (Flush Bottom Rolling) Stacker Door

704FBR (Flush Bottom-Rolling) SlideMASTER™ Stacker Door

• Series 704FBR is a high performance, bottom rolling sliding door with a recessed sill, head and jambs.
• Doors have been tested for compliance with the relevant Australian Standards. Achieved a high water resistance of 300Pa.
• The custom quad rollers are fully adjustable and run on a replaceable, 316 stainless steel insert track.
• Patented moulded nylon turbulence diverters protect the meeting stile junction at sill, guiding air and turbulence away from the inside.
• The extra strong multi hollow meeting stiles allow large sliding doors to be fabricated in high wind load areas, refer panel strength tables.
• This door has been tested to 3300mm high with 2500mm wide panels.
• There are a large variety of door combinations (XF, FX, FXXF, XXF, FXX, FXXXXF, XXXF, FXXX, FXXXXXXF and corner doors).
• We can fit Centor roller screens behind Series 704 sliding doors up to 7400mm wide.
• Square clean lines with soft radius edges on internal meeting stile corners.
• Doors fitted with custom mortice lock at meeting stiles. Lock only accessible from the inside.
• Slimline stiles incorporate built-in, full height, finger grip inside and out.
• Aluminium sub-sills are standard under Series 704FBR doors. We have a variety of sub-sills to choose from.
• Sub-sills are fitted with integrated co-extruded Santoprene drainage hole cover flap to prevent blow-back.
• Door panels will accept 24mm to 26mm double glazed IGU's.